NGF Project: Dual Ringmodulator front view

I was a bit hesitant doing this module because it uses the now obsolete LM1496 balanced modulator-demodulator. But you can still source them and I have some in my stock. So I decided to make a PCB and module for my Next Generation Formant project. I started with the original Elektor Formant schematic published in “Formant Erweiterungen” p35ff. I left out the microphone and envelope follower part because I already have such modules. I have added input buffers and raised the signal level to my 10Vpp used throughout my system. I was able to put two ringmodulator on a 50x100mm PCB.

Specs and features
• Dual ringmodulator
• 10Vpp input and output
• Runs on +/-15V and +/-12V

The documentation for download can be found in my website.

NGF Project: Dual Ringmodulator schematic

This implementation follows closely the original Elektor Formant implementation. Refer to the original documentation if needed. You can find it on the net. My changes are the input buffers and the adaption to my 10Vpp signal level.

NGF Project: Dual Ringmodulator populated PCB

NGF Project: Dual Ringmodulator back view